Trục cánh quạt & Trục trục

In the world of automobiles, propeller shafts, and axle shafts are two essential components that play critical roles in transmitting power from the engine to the wheels.

A propeller shaft, also known as a drive shaft, is a long, slender metal tube that connects the transmission to the rear differential. Its primary function is to transmit torque from the engine to the wheels and provide a smooth transfer of power.

On the other hand, an axle shaft connects the differential to the wheel hub. Its primary function is to transfer torque from the differential to the wheels and help maintain proper wheel alignment.

Whether you are a car enthusiast, a mechanic, a brand that deals with aftermarket car parts, or simply interested in the workings of a car, you need to understand the basics of these two components.

Trục cánh quạt

Characteristics

• A propeller shaft is a cylindrical rod that transmits torque and rotation from the transmission or transfer case to the differential.
• It’s usually balanced to reduce vibration and noise, and to prevent premature wear of the bearings and other components.
• It is designed to withstand torsional and bending stresses, as well as axial and radial loads.

Matching Parts
For the propeller shaft to work efficiently, some matching components are used with it. They include:

• Trục cánh quạt: Also known as the drive shaft, is made of a solid or hollow tube with flanges at each end to connect to the transmission and differential. It transmits torque and rotation from the engine to the wheels, allowing the vehicle to move.
• Vòng bi trung tâm trục cánh quạt: Also known as the carrier bearing or support bearing, is usually made of a durable material such as steel or aluminum and is mounted on a bracket that is bolted to the vehicle’s frame. It is usually located in the center of the vehicle and helps to prevent excessive bending and vibration of the propeller shaft.
• Bộ dụng cụ nhện chung trục chân vịt: A set of bearings and cross-shaped fittings that connect the propeller shaft to the transmission and differential. It allows the propeller shaft to rotate at different angles and speeds without losing power or torque.
• Trung tâm bánh xe tự do: Also known as the locking hub, is a mechanism that allows the front wheels of a four-wheel drive vehicle to rotate independently. When it’s disengaged, the front wheels are disconnected from the front propeller shaft, which reduces wear and tear on the drivetrain and improves fuel economy.
• Van điện từ điều khiển ly hợp Freewheel: Controls the engagement and disengagement of the freewheel hub.

Advantages

• Durability: Propeller shafts are designed to withstand high torque and stress, making them more durable than other drivetrains. Ví dụ, the Ford Ranger prop shaft and Toyota Tundra propeller shafts are made of high-strength steel or aluminum, which makes them resistant to wear and tear, corrosion, and other types of damage.
• Efficiency: Propeller shafts transmit torque and rotation directly from the transmission or transfer case to the differential, which minimizes power loss and improves fuel economy. Aftermarket propeller shafts can also be designed to optimize performance for specific applications, such as off-road driving or high-speed racing.
• Smoothness: Propeller shafts are typically well-balanced, which reduces vibration and noise in the drivetrain. This leads to a smoother ride and less wear on the bearings and other components.

Trục trục

Characteristics

• A durable and high-strength cylindrical rod that transmits torque from the differential to the wheels.
• May be solid or hollow, depending on the vehicle’s design and weight requirements.
• Designed to flex slightly to accommodate suspension movement and rough terrain.

Matching Parts
For the axle shaft to work efficiently, some matching components are used with it. They include:

• Trục trục: The main component of the axle assembly that transmits torque from the differential to the wheel. It is typically made of high-strength steel and has splines on both ends to connect to the differential and wheel hub.
• Bộ nối trục trục: Connects the axle shaft to the wheel hub and allows for rotation and movement. It typically includes a constant velocity (CV) joint, which has bearings and a housing that allows the axle shaft to rotate while the wheel turns and moves up and down.
• Bộ khởi động trục trục: A protective covering that fits over the CV joint and protects it from dirt, debris, and moisture.
• Trung tâm bánh xe tự do: Used in vehicles with four-wheel drive or all-wheel drive to allow the front wheels to disengage from the drivetrain when not needed. This reduces drag and improves fuel efficiency. When four-wheel drive is engaged, the freewheel hub locks the front wheels to the axle shaft and allows torque to be transmitted to the wheels.

Van điện từ điều khiển ly hợp Freewheel: Controls the engagement and disengagement of the freewheel hub.

Advantages

• Durability: Axle shafts, such as the Toyota OEM CV axle are built to exacting standards and use high-quality materials that are designed to last for many years.
• Improved Performance: Aftermarket axle shafts, like Toyota axle shafts, help to improve cars performance by providing more power to the wheels, especially in high-performance vehicles that have been modified to produce more horsepower.
• khả dụng & Cost-effectiveness: Aftermarket axle shafts are widely available, making it easy to find a replacement when needed. And they are often less expensive than OEM axle shafts, while still offering comparable quality and durability.

Phần kết luận

Both propeller shafts and axle shafts are critical components of a car’s drivetrain system, and they play a crucial role in ensuring the smooth and efficient transfer of power from the engine to the wheels. Kể từ đây, they must be maintained and replaced with the right parts when needed.

Kowze manufactures high-quality propeller shafts and axle shafts that exceed the other options on the market. Reach out to us for the best products.

Kowze có đội tìm nguồn cung ứng nguyên liệu, nhà thiết kế sành điệu, và các kỹ sư sản xuất để làm việc cùng với khách hàng của chúng tôi. Chúng tôi là một OEM & Nhà cung cấp phụ tùng ô tô hậu mãi của ODM cung cấp các giải pháp toàn diện cho ô tô và khách hàng của chúng tôi.

Whether you need Nissan propeller shafts or Mitsubishi Lancer axle shafts, chúng tôi sẽ cam kết thực hiện các giải pháp toàn diện để đáp ứng yêu cầu và thông số kỹ thuật của bạn.

• ODM và OEM có sẵn, MOQ nhỏ là 500 chiếc để đúc. Nếu các điều kiện được thỏa mãn, chúng tôi cũng có thể cung cấp MOQ ít hơn 500 chiếc.
• Kim loại cứng cáp với hệ thống tránh va chạm.
• Kinh doanh cùng có lợi vì lợi ích chung.

Every durable part is custom-made to the requirements and vehicle type of clients. Khả năng thiết kế của nó là vô hạn. Hãy cho chúng tôi biết bạn muốn gì, và chúng ta sẽ biến điều đó thành hiện thực. Các bộ phận của chúng tôi là mạnh nhất và cứng rắn nhất trong ngành.